3M MP160 Projector User Manual


 
3M
Pocket Projector MP160
18 © 2010 3M. All Rights Reserved.
English
Status Indicator Light
The status indicator light provides information about the projector’s state.
Status Indicator Light Meaning
Flashes green three times
A new power source is connected to the projector and the
projector is ready to be powered on.
Blank
Projector is off. If the power adapter is connected to the
projector, and the battery is installed, the battery has
finished charging.
Flashes green The projector is starting up.
Solid green The projector is on.
Solid amber The projector is off and charging the battery.
Flashes amber The projector has overheated and needs to cool.
Flashes red twice and pauses
then repeats
The projector cannot charge the battery.
Flashes Red
The projector cannot turn on because the battery needs to
be charged.
On Screen Icons
The projector will display a video icon when it is connected to a video cable or a
video source.
Icon Description/ Meaning
The projector detects the audio/video cable.
NTSC
The projector detects an NTSC video input signal.
PAL
The projector detects a PAL video input signal.
The projector detects the component audio/video cable.
RGB 480i 60Hz
The projector detects the video input signal and displays
the video source’s resolution and refresh rate below the
component icon.
The projector detects the VGA-audio cable.
800x600 60Hz
The projector detects computer input signal and displays the
input resolution and refresh rate
The projector does not support the video signal.
The projector is measuring and synchronizing to video input
signal.