3M MP8750 Projector User Manual


 
3M 1999 3M Multimedia Projector MP8750 13
5-2. Battery Replacement
The remote control uses two AAA batteries. The battery cover is located on the back of the remote control.
1.
Press the locking tab (1) to release door. Figure 5-1)
2.
Lift up on the door (2) to remove it and set it to the side.
3.
Remove old batteries.
4.
Install new batteries (3). Make sure the polarity (+/-) on each battery matches the decal.
5.
Replace battery compartment door.
Figure 5-1. Replacing Batteries