3M MP8755/MP8755L Projector User Manual


 
3M
Multimedia Projector MP8755/MP8755L/MP8770/MP8770L
© 3M 2000
ENGLISH
20
4
5
6
MP8770
+
ZOOM
M
UTE
IN
PU
T
STANDBY ON
RESET
POWERLAMP TEMP
M
ENU
+
FO
CUS
MP8770
PORTABLE PROJECTOR
EPS-132A
Power
1
2
3
5.1 Cleaning the Air Filter
Note
Clean the air filter about every 50 hours. If air is restricted due to dust accumulation on filter, the projector may
shut down due to overheating.
1. Turn off the MAIN POWER SWITCH of the projector and disconnect power cord (1). Let cool for 20
minutes.
2. Push tab (2) and remove the air filter cover (3) from the front of the projector.
3. Lift retainer wire (4) and carefully remove foam air filter (5).
4. Vacuum (6) dust and dirt from filter.
5. Re-install air filter and replace air filter door.
Section 5: Maintenance
Figure 5.1 Remove Air Filter