Filter
Top Products
3M
™
Micro Professional Projector MPro110
© 2008 3M. All Rights Reserved.
11
Operator’s
Guide
Connecting to a Computer Video Source
There are several types of computers that output a video signal: desktop computers, laptop
computers, ultra-portable computers and some personal digital assistants (PDAs). The
3M MPro110 can project the video from these devices using its VGA port. (1) Connect the
included VGA Cable to the projector. (2) Connect the VGA Cable to the device’s video output.
Powering On
Slide the power switch to the ON position. The power LED will turn green and the projector
will energize. The projector will automatically detect the connected cable and switch to the
appropriate port. Then the projector will detect and display the video source. If the video source
is not detected, the projector will display a blue image and the name of the selected port:
CVBS (video) or VGA.
NOTE: The projector will switch to power save mode in 30 seconds if no video or
computer source is detected. The projector will switch to sleep mode in 60 seconds
if there is no source. When a source is detected, the projector returns to full
operating mode.
Tip: The video output on some devices is turned off by default. Please refer to the
device’s documentation for details on enabling the video.
Powering Off
Slide the power switch to the OFF position.
Disconnect video, VGA and AC adapter cables.