Filter
Top Products
15
Setting up
Connecting power supply
WARNING ŹPlease use extra caution when connecting the power cord as
LQFRUUHFWRUIDXOW\FRQQHFWLRQVPD\UHVXOWLQ¿UHDQGRUHOHFWULFDOVKRFN
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's
VSHFL¿HGYROWDJHUDQJH
• Never modify the power cord. Never attempt to defeat the ground connection
RIWKHWKUHHSURQJHGSOXJ
Before connecting, make sure that the power switch is the OFF position (pressed
the side marked “O”).
1.
Connect the connector of the power cord to the AC inlet of the projector.
2.
Firmly plug the power cord's plug into the outlet.
Power switch
AC inlet
Connector of the power cord
© 3M 2006 3M™ Digital Projector S15i