Filter
Top Products
14
1
Make sure that the power cord is firmly and
correctly connected to the projector and outlet
2
3
Press the STANDBY/ON button of remote
control or the on/off button of control panel
•
The projector begins warming up and the power indicator
blinks green.
• The power indicator stops blinking
and lights to solid green once the
projector's power is completely on.
VIDEO
ASPECT
MUTE
KEYSTONEFREEZE
OFF
ON
VOLUME
MAGNIFY
AUTO BLANK
RGB SEARCH
STANDBY/ON
TURNING ON THE POWER
Control panel
Precautions
Connect all devices to be used to the projector prior to turning on the power.
WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.
Turn the
power on/off in
right order.
• Power on the
projector before the
computer or video
tape recorder.
• Power off the
projector after the
computer or video
tape recorder.
NOTE
lamp
temp
power
on off
video rgb
reset
menu
keystone
Turn on the projector's power
Set the power switch to [ | ] (ON). The projector will go
to STANDBY mode and the power indicator will light to
solid orange.
power indicator
power switch