Filter
Top Products
I
I
N
N
T
T
R
R
O
O
D
D
U
U
C
C
T
T
I
I
O
O
N
N
Congratulations on your purchase! Your new Wireless mouse is easy to install and offers you a host of useful
features. The IR receiver can be conveniently placed to give you the freedom you need while working. And, two
wheels allow for easy scrolling in all directions no matter what the application. The vertical wheel allows you to
scroll up and down; the horizontal wheel lets you scroll to the left and right or zoom in and out in a document. You
can program the mouse buttons to launch the NetJump or LuckyJump for a quick start to programs you run
frequently. You can even create your own Command Menu and with one click put all your favorite programs right
under the cursor!
Connecting and Locating the IR Receiver
The IR receiver connects to your computer in the same way as a conventional mouse
allowing you to place the receiver wherever is convenient on your desktop.
1. Locate the round 6-pin PS/2 mouse port on the back of your computer.
2. Insert the PS/2 connector into the PS/2 port.
Locating the IR Receiver
We recommend that you attach the receiver on the underside or side of your
monitor as shown here, between 6~15 cm from the desktop. This will ensure
optimal communication between the wireless mouse and the receiver.
To attach the receiver to the monitor
The receiver is held in place with Velcro. First remove the backing paper
from the Velcro pad and press it firmly in place. Now attach the receiver to
the Velcro pad.
Inserting the Batteries
The wireless mouse uses two AAA batteries. For best performance, use only
alkaline batteries. Refer to the following to insert the batteries:
1. Press the tab on the bottom of the mouse cover as shown here and
remove the cover.
2. Insert the two AAA batteries. (The correct polarity is indicated on
the battery compartment casing.)
3. Replace the cover.
Using the wireless mouse
Operate the wireless mouse as you would a conventional mouse. The mouse
has two transmitters, guaranteeing you the flexibility of movement you need
(up to 160 degrees), whether editing text or working in graphic applications.
Mouse Receiver LED Activity
The green status LED indicates three modes:
Active: The LED is on when the mouse is being used.
Waiting: The LED blinks when the mouse is waiting to receive incoming data.
Sleep: If there is no mouse activity for eight seconds, the system goes to Sleep
mode and the LED is off.
Note!
In Sleep mode the Wireless Mouse is powered down and battery power is conserved. Moving
the mouse or clicking on a button instantly brings it back to Active mode.
Installing the Mouse Software
Before you can take advantage of the many features your mouse offers, you must install the driver. The driver is on
the installation diskette that came packaged with your mouse.
6 ~ 15 cm
Status LED
PDF 檔案以 "FinePrint pdfFactory Pro" 試用版建立 http://www.pdffactory.com