Filter
Top Products
28
Basic Picture menu
To adjust the following settings, highlight the setting, press Select, use the
up and down arrows to adjust the values, then press Select to confirm the
changes.
Brightness: changes the intensity of the image.
Contrast: controls the degree of difference between the lightest and darkest
parts of the picture and changes the amount of black and white in the
image.
Sharpness: (video sources only) changes the clarity of the edges of a video
image. Select a sharpness setting.
Color: adjusts a video image from black and white to fully saturated color.
The color setting applies to video sources only.
Tint: adjusts the red-green color balance in the image of NTSC video
images. The tint setting applies to NTSC video sources only.
Aspect Ratio: Aspect ratio is the ratio of the image width to image height.
TV screens are usually 4:3. HDTV and most DVDs are 16:9. The default is
4:3.
Select Auto to have the projector choose the ratio. Choose Native to see the
unmodified input with no resizing by the projector.
Select 16:9 to watch enhanced widescreen DVDs.
For more information regarding Aspect Ratio, see page 12.
Apply Preset...: Presets are provided that optimize the projector for dis-
playing computer presentations and video images under certain conditions.
There are also user-definable presets. To set a preset, adjust the image, select
Save User in the Presets menu. You can recall these settings in the future by
selecting the User preset.
Keystone: adjusts the image vertically and makes a squarer image. You can
also adjust keystone from the keypad.
Basic Picture
menu
Aspect ratio
Auto
Native
4:3
16:9
Letterbox
Panorama
Basic Picture
Contrast
Sharpness
Color
Tint
Aspect Ratio
Apply Preset…
50
50
50
50
Auto
increasing keystone
decreasing keystone