Filter
Top Products
3
The entire machine is dispatched in one package, but the stand has been dismounted from the
machine.
The tool box contains:
- a set of tools for service and maintenance,
- the mounting hardware for the stand,
- the back gauge crank (#3) with a mounting screw,
- two keys for safety lock.
• Place machine (#1) on stand (#8).
• Insert the four securing bolts for the stand into provided holes and secure with nuts.
• Place paper tray (#10) into the stand (#8).
• For models IDEAL 4850, IDEAL 4850-90, and IDEAL 5250, connect power cord with plug to a
normal single phase AC socket.
The models IDEAL 6550 and IDEAL 6550-90 must be connected to a 5-point, 3 phase current
source. If, when switched on the machine should fail to operate, then the phase sequence of the
machine does not coincide with that of the power source. To rectify this one must swap the brown
(or red) wire with a black one in the plug of the machine.
The machine is now ready to be operated.
Performance
All paper qualities and light cardboard (up to a weight of 200 g/m²) can be cut using the full
cutting height and cutting length of the machine.
4850
4850-90
5250 6550
6550-90
Cutting Length 475 mm
(18-3/4”)
520 mm
(20-1/2”)
650 mm
(25-1/2”)
Cutting Height 80 mm
(3-1/8”)
80 mm
(3-1/8”)
80 mm
(3-1/8”)
Table Depth 460 mm
(18-1/8”)
520 mm
(20-1/2”)
610 mm
(24”)
Narrow Cut 30 mm
(1-3/16”)
35 mm
(1-3/8”)
35 mm
(1-3/8”)
With the false clamp mounted on models IDEAL 6550 and IDEAL 6550-90 the cutting height is
reduced to 75 mm (3”), and the narrow cut is 50 mm (2”).
Features and Operation
• Main Switch (#13)
Turn main switch (#13) to position “|” (on), in order to begin operation. The main switch can also
be used as an EMERGENCY SWITCH, which stops the machine immediately.
• Safety lock with key (#7)