Abit IS-12 Computer Hardware User Manual


 
3-4 Chapter 3
Cylinder
This item configures the numbers of cylinders.
Head
This item configures the numbers of read/write heads.
Precomp
This item displays the number of cylinders at which to change the write timing.
Landing Zone
This item displays the number of cylinders specified as the landing zone for the
read/write heads.
Sector
This item configures the numbers of sectors per track.
Drive A
This item sets the type of floppy drives installed.
[None]: No floppy drive installed
[360K, 5.25 in.]: 5.25-inch standard drive; 360KB capacity
[1.2M, 5.25 in.]: 5.25-inch AT-type high-density drive; 1.2MB capacity
[720K, 3.5 in.]: 3.5-inch double-sided drive; 720KB capacity
[1.44M, 3.5 in.]: 3.5-inch double-sided drive; 1.44MB capacity
[2.88M, 3.5 in.]: 3.5-inch double-sided drive; 2.88MB capacity
Video
This item selects the type of video adapter used for the primary system monitor.
[EGA/VGA]: (Enhanced Graphics Adapter/Video Graphics Array) For EGA, VGA,
SVGA and PGA monitor adapters.
[CGA 40]: (Color Graphics Adapter) Power up in 40-column mode.
[CGA 80]: (Color Graphics Adapter) Power up in 80-column mode.
[Mono]: (Monochrome adapter) Includes high-resolution monochrome adapters.
Halt On
This item determines whether the system stops if an error is detected during system
boot-up.
IS-10 / IS-11 / IS-12 / IS-20