Filter
Top Products
3-18 Chapter 3
Wake-Up by PCI card/LAN
When set to [Enabled], access to the onboard LAN or a PCI card such as a modem or
LAN card will cause the system to wake up. The PCI card must support the wake up
function.
Power On by Ring
Two options are available: Enabled and Disabled. Default setting is Disabled. If you
connect an external modem to the onboard serial port, the system will be turned on
when a telephone ring-up occurs.
Resume by Alarm
When set to [Enabled], you can set the date and time you would like the Soft-Off PC
to power-on in the “Date (of Month) Alarm” and “Time (hh:mm:ss) Alarm” items.
However, if the system is being accessed by incoming calls or the network (Resume
On Ring/LAN) prior to the date and time set in these items, the system will give
priority to the incoming calls or network instead.
Date (of Month)
[0]: This option power-on the system everyday according to the time set in the “Time
(hh:mm:ss) Alarm” item.
[1-31]: This option selects a date you would like the system to power-on. The system
will power-on on the date set, and the time set in the “Time (hh:mm:ss) Alarm” item.
Resume Time (hh:mm:ss)
This item sets the time you would like the system to power-on.
IS-10 / IS-11 / IS-12 / IS-20