Filter
Top Products
BIOS Setup for NVRAID (NF7-S2/NF7-S2G) F-3
Array List
The Array List window appears, where you can
review the RAID arrays that you have set up.
Use the arrow keys to select the array that you
want to set up, then press <Enter> key.
Array Detail
The Array Detail window shows information
about the array that you selected, such as
Striping Block used, RAID Mode, Striping
Width, Disk Model Name, and disk capacity.
If you want to mark this disk as empty and wipe
out all its contents, press <C> key.
At the prompt, press <Y> key to wipe out all the
data, otherwise press <N> key.
Press <Enter> key again to go back to the
previous window and then press <F10> key to
exit the RAID setup.
NOTE: The information shown in the
illustrations would vary according to the
platform used.
User’s Manual