Filter
Top Products
Pocket Programmer Model UPP
- 2 -
DESCRIPTION
The Pocket Programmer (model UPP) provides many of the features
of UPStart UPB configuration software in a portable hand held device.
The Pocket Programmer comes with a handy carrying case and AC
power cord that plugs into any standard receptacle allowing
communication to installed UPB devices. The Pocket Programmer is
intended for use by an installer who is familiar with UPStart and UPB
products. It virtually eliminates the need to have a PC with UPStart
software and a Computer Interface Module (CIM) at every jobsite. It
makes configuring UPB devices from room to room, quick and easy.
The UPP may be used instead of UPStart to provide initial
configuration steps such as adding devices to a UPB network or
disabling dimming allowing a newly installed switch to operate a
fluorescent fixture. It could also be used to program an entire UPB
installation. No data is stored in the UPP. The UPB network and
device programming is stored in each UPB device. A UPB network
that was configured with the UPP may be added to UPStart at any
time by using the Network Discovery feature in UPStart. The UPP
has diagnostic tools that include a noise and signal meter and an
explorer feature that reads and transmits UPB messages on the
powerline. In the Run CIM mode the Pocket Programmer may be used
as a Computer Interface Module.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic safety precautions should
always be followed, including the following:
1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. Keep away from water. If product comes into contact with
water or other liquid, unplug immediately.
3. Never use products that have been dropped or damaged.
4. Do not use this product outdoors.
5. Do not use this product for other than its intended use.
6. To avoid risk of fire, burns, personal injury and electric
shock, install this product out of reach of small children.
7. Do not cover the product with cloth, paper or any material
when in use.
8. This product uses polarized plugs and sockets (one blade is
wider than the other) as a feature to reduce the risk of
electric shock. These plugs and sockets fit only one way. If
they do not fit, contact a qualified technician. Do not use
with an extension cord unless plugs can be fully inserted.
Do not alter or replace plugs.
9. SAVE THESE INSTRUCTIONS.