Filter
Top Products
Chapter 2 41
Parallel Port Enables or disables the parallel port. Enabled or Disabled
Note: Depending on your
operating system, disabling an
unused device may help free
system resources for other
devices.
Mode Sets the operation mode of the parallel port. ECP, EPP, Bi-directional or
Normal
Base I/O address Sets the I/O address for the parallel port. 378/278/3BC
Note: When Mode is selected
as EPP mode,“3BC” will not be
available.
Interrupt Set the interrupt for the parallel port. IRQ7or IRQ5
DMA channel Set the DMA channel for the paralle port. DMA1/DMA0/DMA3
Note: This field is hdden if
Mode is not ECP.
Legacy USB Support Eeable or disable support for Legacy
Universal Serial Bus.
Enabled or Disabled
Parameter Description Options