AcerPower 2100 User’s Guide2-2
Special features such as PnP (Plug-and-Play) support, Power Management, Wireless
Communication, Hardware Monitoring, Wake-on Ring, and Wake-on LAN (Local Area
Network) functions are also supported. These functions are individually discussed in this
chapter.
The system is fully compatible with MS-DOS V6.X, OS/2, SCO UNIX, Windows NT, and
Windows 95/98 operating systems.
2.1 Major Components
The system board has the following major components:
• A CPU (Central Processing Unit) connector that supports either of the following:
• Pentium II processor running at 266, 300, 333, 350, 400, and 450 MHz
• Celeron processor running at 266,300, and 333 MHz
• Two DIMM sockets that accept 8-, 16-, 32-, 64-, and 128-MB Standard DRAMs,
with Parity Check or Error Correction Code (ECC) feature. These sockets allow
memory upgrade of up to 256 MB
• PCI local bus IDE (Integrated Device Electronics) controller
• 3-D audio controller
• AGP-compliant 3-D video graphics accelerator with 4-MB SGRAM
• One Feature connector
• One Wake-on LAN connector
• One Modem ring-in connector
• One Modem connector
• Two PCI enhanced IDE interfaces that support up to four IDE devices
• External ports
