Filter
Top Products
Chapter 3 91
System Upgrade Procedure
Base Unit to Wireless Unit
1. See “Removing the Battery” on page 62
2. See “Removing the Middle Cover” on page 68
3. See “Removing the Keyboard” on page 69
4. See “Removing the Heat Plate” on page 70 (Remove three screws here)
5. Note that the one with the white RF cable is for the right antenna and the one with the black RF cable is
for the left antenna.
6. Insert the wireless LAN board into its socket and press it down to secure well.
7. Attach the right antenna to the upper case and secure it with a screw. Route the cable as shown below.
8. Attach the left antenna to the upper case and secure it with a screw. Route the cable as shown below.