Filter
Top Products
Chapter 3 60
NOTE: Please arrange the LCD inverter cable well to the LCD panel as the picture below shows when you
reassemble the LCD module.
Removing the 15” TFT LCD
1. See “Removing the Battery” on page 52.
2. See “Removing the Middle Cover” on page 56.
3. See “Removing the Launch Board” on page 56.
4. See “Removing the LCD Module” on page 57.
5. See “Removing the LCD Bezel” on page 59.
6. See “Removing the Inverter Board (15” LCD)” on page 59.
7. To remove the LCD, first remove the four screws that secure the LCD hinges.
8. Then take the LCD out of the LCD panel.
Removing the LCD Brackets
1. See “Removing the Battery” on page 52.