Filter
Top Products
40 Chapter 2
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings..
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
Parameter Description Format/Option
System Time Sets the system time. Format: HH:MM:SS
(hour:minute:second)System Time
System Date Sets the system date. Format MM/DD/YYYY (month/day/
year)
System Date
Floppy Disk Drive Shows floppy drive type information.
Internal Hard Disk Shows the hard disk types and capacity. If there
is no hard disk present or unknown type, “None”
should be shown on this field, otherwise the
capacity must be shown.
ATAPI Device Auto detects and shows the CD-ROM, DVD-
ROM or CD-RW types. If there is no ATAPI
Device present or unknown type, “None” should
be shown on this field, otherwise the model
name must be shown.
Boot Display Device Both: Simultaneously enable both the integrated
LCD screen and the system’s external video port
(for an external CRT or projector).
Auto-Selected: During power on process, the
system will detect if any display device is
connected on external video port. If any external
display device is connected, the power on
display will be in CRT (or projector) only mode.
Otherwise it will be in LCD only mode.
Option:
Both or Auto-Selected
Screen Expansion
Option:
Enabled or Disabled
Television Type Selects NTSC or PAL standard.
Option:
NTSC or PAL
VGA Memory Specifies the amount of main memory to allocate
for VGA.
Option:
32MB/16MB/64MB