Filter
Top Products
90 Chapter 3
10. Remove the four screws (I) securing the LCD module and the Inverter panel.
11. Detach the LCD with the brackets from the back cover.
Removing the Inverter Board and FPC Cable
1. See “Removing the Battery Pack” on page 56.
2. See “Removing the SD dummy card” on page 56.
3. See “Removing the ExpressCard dummy card” on page 57.
4. See “Removing the Lower Cover” on page 57.
5. See “Removing the WLAN Board Modules” on page 60.
6. See “Removing the Keyboard” on page 69.
7. See “Removing the LCD Module” on page 70.
8. See “Removing the LCD Bezel” on page 87.
9. See “Removing the LCD module with the Brackets” on page 88.
Step Size (Quantity) Color Torque
1~4 M2.5 x L4 (4) Silver 3.0 kgf-cm