Filter
Top Products
48 System Utilities
Setting the Boot Drive Sequence
The Boot Drive Sequence section lists boot priorities (1st, 2nd and 3rd) for
bootable drives in your computer.
For example, the default value (1st:Floppy Disk, 2nd:Hard Disk, and 3rd:CD-
ROM) tells the computer to first search for a bootable floppy disk in the floppy
drive. If it finds one present, it boots up from that floppy disk. If not, the
computer continues by booting up from the hard disk. If it cannot boot up
from the hard disk, it continues to search for a bootable CD-ROM in the CD-
ROM drive.
To set the boot drive sequence, use the cursor up/down keys to select a
priority level (1st, 2nd, or 3rd); then use the cursor left/right keys to select
the device for that priority level.
Quiet Boot Hides the POST messages and displays
the TravelMate logo startup screen.
Enabled
or
Disabled
PnP OS With Simple Boot FLAG disabled, enables
or disables Plug-and-Play operating
system settings.
Enabled
or
Disabled
Boot Drive
Sequence
Specifies the order in which the computer
starts up from. See the section below.
1st: Floppy Disk,
2nd: Hard Disk,
3rd: CD-ROM
Parameter Description Options