Filter
Top Products
Chapter 1 15
This section has two table lists, system memory specification and the possible combinations of memory
module.
System Memory
Item Specification
Memory socket number 2 slots (4 banks)
Support memory size per socket 64MB~1GB
Support maximum memory size 2GB
Support memory type DDR SDRAM
Support memory speed 266MHz(PC2100)
Support memory voltage 2.5V
Support memory module package 184 -pin DIMM
Support to parity check feature Yes
Support to Error Correction Code (ECC)
feature.
Yes
Memory module combinations You can install memory modules in any combination as long as they match
the Memory Combination specifications.
Memory Combinations
Slot Memory Module Total Memory
Slot 1 (Bank 0 & Bank
1)
64MB, 128MB,
256MB, 512MB, 1GB
64MB~1GB
Slot 2 (Bank 0 & Bank
1)
64MB, 128MB,
256MB, 512MB, 1GB
64MB~1GB
Maximum System Memory Supported 64MB~2GB
Cache Memory
Item
First-Level Cache Configurations
Cache function control Enable/Disable by BIOS Setup (Advanced options)
Second-Level Cache Configurations: Below information is only applicable to system with installed Pentium 4
processor.
L2 Cache RAM size Pentium IV processor: 256 KB
L2 Cache RAM speed The same with the processor core clock frequency
L2 Cache function control Enable/Disable by BIOS Setup
Video Interface
Item Specification
Video controller resident bus AGP bus
Video interface support 1x / 2x / 4x AGP Signaling and 2x / 4x Fast Writes
The AGP buffers operate only 1.5V mode