Filter
Top Products
Chapter 2 43
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
NOTE: The sub-items under each device will not be shown if the device control is set to disabled. This is
because the user is not allowed to control the settings in these cases.
Parameter Description Format/Option
System Time Sets the system time. The hours are displayed with
24-hour format.
Format: HH:MM:SS
(hour:minute:second) System Time
System Date Sets the system date. Format MM/DD/YYYY
(month/day/year) System Date
System Memory Displays the system memory size. Memory size is
fixed to 640KB
Extended Memory Displays the total size of the installed memory.
Video Memory Displays the video memory size.
Quiet Boot Determines if the Customer Logo and Summary
Screen will be displayed or not during boot up.
Enabled: Customer Logo is displayed, and
Summary Screen is disabled.
Disabled: Customer Logo is not displayed, and
Summary Screen is enabled.
Option:
Enabled or Disabled
Network Boot Enables, disables system boot from LAN (remote
server).
Option:
Enabled or Disabled
F12 Boot Menu Enables, disables the Boot Menu during POST.
Option:
Disabled or Enabled
D2D Recovery Enables, disables the D2D Recovery function. This
function allows the user to create a hidden partition
on hard disc drive to store the operation system
and restore the system to factory defaults.
Option:
Enabled or Disabled
SATA AHCI Enable Selects the mode in which the SATA controller
operates.
Option:
AHCI Mode or IDE Mode