Filter
Top Products
40 Chapter 2
DOS Flash Utility
Perform the following steps to use the DOS Flash Utility:
1. Press F2 during boot to enter the Setup Menu.
2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move
USB HDD to position 1.
3. Execute the FLASH.BAT batch file to update BIOS.
The flash process begins as shown.
Item Specific Help
Use < > or < > to select
a device, then press
<F5> to move it down the
list, or <F6> to move
it up the list. Press
<Esc> to escape the menu
F1
ESC
Help
Exit
Select Item
Select Menu
Change Values
Select SubMenu
Enter
F9
F10
Setup Default
Save and Exit
Boot priority order:
1. IDE HDD: Toshiba MK5055GSX-(S1)
2. IDE HDD: WDC WD1600BEVT-22ZCT0-(S5)
3. IDE CD: HL-DT-ST DVDRAM GT20N-(S2)
4. PCI LAN: MBA v11.4.1 Slot 0600
5. USB HDD:
6. USB CDROM:
7. USB FDC:
8. USB KEY:
Boot priority order:
1. IDE HDD: Toshiba MK5055GSX-(S1)
2. IDE HDD: WDC WD1600BEVT-22ZCT0-(S5)
3. IDE CD: HL-DT-ST DVDRAM GT20N-(S2)
4. PCI LAN: MBA v11.4.1 Slot 0600
5. USB HDD:
6. USB CDROM:
7. USB FDC:
8. USB KEY:
F5/F6
Phoenix SecureCore(tm) Setup Utility
Main Boot
Exit
SecurityInformation
Excluded from boot order:Excluded from boot order: