Filter
Top Products
E-8 User’s Guide
INSTALLATION
To install the monitor to your host system, please follow the steps as given below:
Steps
1.Connect Video Cable
a.Make sure both the monitor and computer are powered-OFF.
b.Connect the video cable to the computer.
2.Connect power cord
Connect the power cord to the monitor, then to a properly grounded AC outlet.
3.Connect the Audio Cable.
4.Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
5.If the monitor still does not function properly, please refer to the troubleshooting
section to diagnose the problem.
Please don’t open
the Cover.