Filter
Top Products
83
3 Retype the password to verify your first entry then press Enter.
4 Highlight the Set or Change Password option then press Enter.
5Press Esc to return to the System Security screen.
6Press Esc to exit Setup. The Exit Setup screen appears.
7 Choose Yes to save your settings and exit Setup. Your password
will be saved to CMOS.
Removing a password
To remove your Supervisor/User password:
1 Disable the Supervisor Password or User Password parameter in
the System Security menu by pressing the up or down arrow key
to select None.
2Press Esc to return to the System Security menu.
3Press Esc to exit Setup. The Exit Setup screen appears:
4 Choose Yes to save your settings and exit Setup. Your previous
password will be removed from CMOS.
AA G500.book Page 83 Thursday, September 13, 2001 6:56 PM