Filter
Top Products
www.packardbell.com
73
5 Remove the speaker screws.
6 Release the speaker cable from the palm rest, and then remove the
speakers.
7 Position the new speakers on the palm rest.
8 Secure the speakers with the screws removed in step 5 and cover it with
the tape that was detached in step 4.
9 Secure the speaker cable on the palm rest latches
10 Reinstall the palm rest by performing steps 19–21 of the “Replacing the palm
rest” procedure on page 68.
11 Reinstall the LCD panel assembly by performing steps 16–23 of the
“Replacing the LCD panel assembly” procedure on page 64.
12 Reinstall the keyboard and the keyboard cover by performing steps 5–8 of
the “Replacing the keyboard” procedure on page 62.
13 Return the optical screw drive in its place.
14 Reinstall the hard drive by performing steps 8 and 9 of the “Replacing the
hard drive” procedure on page 54.
15 If you have disconnected any wireless antennas, reconnect them now.
16 Reinstall the bay cover.