Filter
Top Products
32
4.2 Microsoft Networking Checklist
In order for the IEEE802.11b WLAN to run properly, some network items must be
presented in the Microsoft “ Network Neighborhood “ setup. To check and activate the
network setup, please right-click the “ Network Neighborhood “ and then select
“Properties” with your mouse. The following items should be presented in the
network setup:
1. IEEE802.11b Wireless LAN Adapter (PCMCIA)
2. IPX / SPX-compatible Protocol ->IEEE802.11b Wireless LAN Adapter (PCMCIA)
3. NetBEUI -> IEEE802.11b Wireless LAN Adapter (PCMCIA)
4. TCP / IP -> IEEE802.11b Wireless LAN Adapter (PCMCIA)
5. File and printer sharing for Microsoft Networks
6. Client for Microsoft Networks
If any of these items are missing, please follow the instructions below to install them
properly:
Set up the Network Protocols
:
• Click “ Add “ and select “ Protocol “ on “ Select Network Configuration Type“.
• Click “ Add “ and then choose the network protocol. Select Microsoft as the
manufacturer and “ NetBEUI “, “ TCP/IP “, and “ IPX/SPX-compatible “ for the
network protocols. Then click “ OK; “
• Now your network protocol should be set. Please check if your network needs
any special requirements to operate in your office environment.