Filter
Top Products
Chapter 2 — Installation
17
FIGURE 2-12: SETUP PROGRAM OF THE ISDN CARD
4. If your PC has PnP BIOS, you can choose “Auto Setting”.
Then the IRQ and I/O Port of the ISDN card will be
configured by the system.
5. Select the signalling protocol and PCM coding rule of the
ISDN switch. Input the ISDN number and click “OK”.
6. After setting the properties of the ISDN card, you might
see the following screen prompting for the path of the
Windows NT source files to installing the Remote Access
Service (RAS).