Filter
Top Products
52 Chapter 3
Removing the USB/LED/Power/Card Reader Board
1. Remove the upper cover. See “Removing the Upper and Lower Covers” on page 39.
2. Remove the three (3) securing screws as shown.
3. Lift the board to expose the USB/LED/Power board to mainboard cable.
Step Size Quantity Screw Type
HDD SKU:
USB/LED/Power
board
M2*3 (NL) 3
SDD SKU:
USB/LED/Power
board
M2*3 (NL) 4
HDD SKU
SSD SKU