Filter
Top Products
5
ENGLISH
Detaching LCD Monitor from Its Stand
1. Unscrew screws of the hinge bracket
2. Remove the stand from LCD monitor
(See fig. 1-3)
Figure 1-3
Interface for Arm Applications
Before installing to mounting device, please refer
to Fig.1-3.
The rear of this LCD display has four integrated
4 mm, 0.7 pitches threaded nuts, as well as four
5 mm access holes in the plastic covering as
illustrated in Figure 1-4. These specifications
meet the VESA Flat Panel Monitor Physical
Mounting Interface Standard (paragraphs 2.1
and 2.1.3, version 1, dated 13 November 1997).
Figure 1-4
Connecting the Display to your Computer
1. Power off your computer.
2.
Connect one end of the signal cable to the
LCD Monitor's VGA port. (See Fig. 1-5)
3.
Connect the other end of the signal cable to
the VGA port on your PC.
4. Make sure both connections are secure.
Figure 1-5
Attention
This device must be connected to an off-the-shelf video cable in order to comply with FCC
regulations. A ferrite-core interface cable is included in the LCD Monitor package.
This device will not be in compliance with FCC regulations when a non-ferrite-core video cable is