Filter
Top Products
3 Setting up your computer
32
Power cable
Caution! Before you proceed, check the voltage range in your
area. Make sure that it matches your computer’s voltage setting
(refer to page 12 for the location of the voltage selector switch on
the rear panel of your computer). If they don’t match, change
your computer’s voltage setting according to your area’s voltage
range.
Plug the power cable into the power cable socket located on the rear
panel of your computer. Then plug the other end of the power cable
into a power outlet.
ver3300-ug-EN.book Page 32 Monday, July 2, 2001 4:58 PM