Filter
Top Products
STANDARD TIMING TABLE
To reduce the need for adjustment for different modes, the monitor has default setting modes that are most
commonly used as given in the table below. For optimum adjustment, the user is suggested to perform the
Auto Setup under Windows “Full Screen” pattern or using the pattern in the floppy disk provided. The only
condition to store as a user mode is the new display information must have 1 KHz difference for horizontal
frequency or 1 Hz for vertical frequency or the sync signal polarities are different from the default modes.
Display Mode Hor. Frequency
(kHz)
Vert. Frequency
(Hz)
Pixel Frequency
(MHz)
SYNC Polarity
(H/V)
31.469 59.940 25.175 -/-
37.861 72.809 31.500 -/-
VGA 640x480
37.500 75.000 31.500 -/-
35.156 56.250 36.000 +/+
37.879 60.317 40.000 +/+
48.077 72.188 50.000 +/+
SVGA 800x600
46.875 75.000 49.500 +/+
48.363 60.004 65.000 -/-
56.476 70.069 75.000 -/-
XGA 1024x768
60.023 75.029 78.750 +/+
SXGA 1152x864
67.500 75.000 108.000 +/+
63.981 60.020 108.000 +/+
SXGA 1280x1024
79.976 75.025 135.000 +/+
WXGA 1280x768
47.776 59.870 79.500 -/+
VESA
WXGA+ 1440x900
55.935 59.887 106.500 -/+
VGA TEXT
720 x 400 31.469 70.087 28.322 -/+
640x480 35.000 66.667 30.240 -/-
832 x 624 49.725 74.500 57.283 -/-
Macintosh
1024 x 768 60.150 74.720 80.000 -/-
X193W
EN-
12