Filter
Top Products
Chapter 3 35
Removing the Processor
IMPORTANT:Before removing a processor from the mainboard, make sure to create a backup file of all
important data.
WARNING:The processor becomes very hot when the system is on. Allow it to cool off first before handling.
1. See “Removing the Side Panel” on page 31.
2. See “Removing the Heatsink Fan Assembly” on page 34.
3. Release the load lever, then pull the load lever to the fully open, upright position.
4. Pull out the processor from the socket.
IMPORTANT:If you are going to install a new processor, note the arrow on the corner to make sure the
processor is properly oriented over the socket.