Filter
Top Products
12. Remove the cam gear, reduction gear, change gear and gear guide
12-1 12-2
12-3 12-4
1.Remove th e motor gear.(12-1)
2.Remove one screw to remo ve the Lever Holding Spring(12-2)
3.Pull the cam gear out of the shaft , Inset a standard type screwdriver into the gap
between the cam gear and fram e, and left the cam gear. Be careful mot to press the
screwdriver against the shaft from the side.
4.Remove the reduction gear in the same as shown in above step. The change gear
and gear guide are also remov e with the reduction gear.