Filter
Top Products
29
Performing a
Basic Setup
This chapter is a guide through a basic setup of the Modem for those users who
did NOT use the Actiontec Installation Buddy® to setup the Modem. It includes
instructions on how to connect the Modem to the ISP and changing the admin
user name and password.
To complete a basic setup, the user will need information provided by the ISP. This
information is sometimes contained in a welcome letter or ISP worksheet. If this
document is not available, contact the ISP immediately and request one.
Basic Setup
☞
Note: If you already set up the Modem using the Installation
Buddy (as described in Chapter 2, “Setting Up the Modem,” on
page 7), the settings described in this section have already been
configured. Continue to chapter 4, “Using Advanced Setup” on
page 33, to configure the advanced settings of the Modem.
1. Open a Web browser. In the address bar, enter
http://192.168.0.1
then press Enter on the keyboard.
2. The “Main Menu” screen appears. Select Setup/Configuration.
3