Actiontec electronic GT701 Network Card User Manual


 
36
Actiontec USB/Ethernet DSL Modem User Manual
37
Chapter 4 Using Advanced Setup
Obtain an IP Address through PPPoE or PPPoA
Select one of these options to allow the Modem to use the Point-to-Point over
Ethernet (PPPoE) or Point-to-Point over ATM (PPPoA) protocol.
Broadband Connection via PPPoE” screen:
“Broadband Connection via PPPoA” screen:
If a User Name, Password and/or Static IP was entered in the Installation Buddy,
it should be displayed in the “Broadband Connection via PPPoE/PPPoA” screen. If
not, enter the information now. If the information is unavailable, contact the ISP.
PPP Auto Connect
If PPP auto connect is activated (by clicking in the appropriate check box), the
Modem will attempt to automatically redial the PPP connection if it is dropped
or disconnected during an online session. Actiontec recommends activating PPP
Auto Connect.