Filter
Top Products
18
Actiontec DSL Gateway User Manual
19
Chapter 3 Setting Up Static IP
Configuring for a Block of Static IP Addresses
To set up the Gateway to use a block of static IP addresses:
Note: To complete this procedure, you must have access to the
Internet Service Provider (ISP) worksheet. If no worksheet has
been provided, contact the ISP.
1. Open the Web browser. In the address bar enter:
http://192.168.0.1
then press Enter on the keyboard.
2. The “Main Menu” screen appears. Select Setup/Configuration.
3. In the “Set Up/Configuration” screen, read the instructions, then select
Advanced Setup from the menu on the left side.