Filter
Top Products
26
Actiontec DSL Gateway User Manual
27
Chapter 4 Configuring Advanced Settings
Encapsulation (PPPoA only)
Select one of the encapsulation options, based on information received from the ISP.
Save & Apply
Click this button to save and apply the changes made in either of the “Broadband
Connection” windows.
Obtain an IP Through DHCP
Select this option if the IP service is configured to use RFC 1483 Bridged or Routed
(used for configurations without a static IP address assigned by an ISP). In this mode,
the Gateway will query the ISP to receive the IP address and routing information,
which will terminate at the Gateway, as opposed to the IP address and routing infor-
mation being bridged to terminate at the computer. This allows the use of the router
capabilities for the local area network (LAN).
Some ISPs need to authenticate their end users with a Host Name and/or Domain
Name. If this is the case, check with the ISP for a host name and domain name and
enter them in the “Broadband Connection via DHCP” screen. If the ISP does not
require these settings, leave the text boxes blank.
Note: Contact the ISP if unsure of the proper configuration.