Adaptec 29320A Network Card User Manual


 
1
Introduction
The Adaptec SCSI Card 29320A enables you to connect up to 15
Low Voltage Differential (LVD) and/or 15 Single-Ended (SE) SCSI
devices—such as very large arrays of high-performance hard disk
drives, external storage subsystems, Ultra320/160 hard disk drives,
scanners, and CD-ROM drives—to any Intel-based computer with
64- or 32-bit PCI/PCI-X expansion slots.
The Adaptec SCSI Card 29320A has one internal and one external
68-pin LVD connector and two internal SE SCSI connectors (one
68-pin and one 50-pin).
Although the Adaptec SCSI Card 29320A is a 64-bit PCI/PCI-X
card, it also works in a 32-bit PCI slot. When installed in a 32-bit
PCI slot, the card automatically runs in the slower 32-bit mode.
This installation guide explains how to:
Install the Adaptec SCSI Card 29320A
Set up SCSI devices
Connect SCSI devices
68-pin internal LVD
connector
68-pin internal SE
connector
68-pin external
LVD connector
50-pin internal SE
connector
ASC-29320A IG.fm Page 1 Tuesday, July 29, 2003 3:30 PM