Adaptec SBC-596 Computer Hardware User Manual


 
58 SBC-596/599 User's Manual
Windows NT Drivers Setup
Procedure
Step 1
1. Install Windows NT as you normally would for a VGA display.
2. First click the Start button, choose Settings and click on
Control Panel.
3. Choose the Display icon and click on the icon.
4. In the Display Properties window, click on the Settings tab.
5. Click on Change Display Type. In the Change Display Type
window, click on the Change button under Adapter Type.
This will bring up the Select Device window.
Step 2
1. In the Select Device window, click on the Other button. Enter
source directory where the Windows NT driver files are
located.
2. Press <ENTER> and the name of the Chips and Technologies
Video Accelerator driver will appear at the end of Models list
box. Scroll to the end of the list box and double click on the
driver.
3. Once the installation is complete, the system must be shut
down and restarted.
Step 3
1. Upon restarting your computer, select the desired display
settings from the Display property dialog box.
2. Click on Test to test the newly selected graphics mode. A
color test screen should appear, followed by the Testing
Mode window.
3. Click on Yes to continue. The Display Settings Change
window will appear.
4. Click on Restart Now for the new settings to take effect.