Adaptec USB2connect Host Bus Adapter Network Card User Manual


 
3
Overview
Contents of Box
One Adaptec USB2Connect Host Bus Adapter (AUA-3100LP
or AUA-5100)
One 10-foot (3-meter), USB 2.0 certified, high-speed cable used
to connect USB devices
Hardware Installation Guide
USB2connect Installation CD
Required Operating Systems
Microsoft Windows Windows 98 SE,
Windows 2000, Windows Me
Macintosh Power Macintosh Beige G3 Rev. B
or newer, with Mac OS 9.0.4 and
higher
Note: For the latest information on Mac OS X support, see
the Readme file on the CD or check the Adaptec Web site at
http://www.adaptec.com.
Other Requirements
Available PCI slot (32- or 64-bit, 3.3- or 5-volt compatible)
CD-ROM drive
Note: For Macintosh systems, a Beige Power Macintosh G3
with Rev B. or newer logic board is required.
Goal of This Guide
This guide explains how to install USB2connect into an available
PCI slot and verify that USB drivers are installed.
This guide also reviews how to connect the cable to a USB device.