ADC 100 Power Supply User Manual


 
ADCP-92-063 • Issue 1 • May 2005
Page 5
© 2005, ADC Telecommunications, Inc.
Figure 2. OptEnet Media Converter Converter
Any blinking of a Link LED indicates auto-negotiation in process. If a Link LED continues to
blink for more than 30 seconds then the operation of the far end device (i.e., duplex and speed)
needs to be verified or changed.
Table 2. Module LED Indicators
SIGNAL COLOR STATUS
TP Link YELLOW Auto negotiation complete, link status 10 Mb/s is OK.
GREEN Auto negotiation complete, link status 100 Mb/s or 1000 Mb/s is OK.
OFF Link status failed or no Ethernet detected.
Link YELLOW Auto negotiation complete, link status 10 Mb/s is OK.
GREEN Auto negotiation complete, link status 100 Mb/s or 1000 Mb/s is OK.
OFF Signal detect de-asserted, link status FAIL.
PWR GREEN Module Power OK
OFF Module Power OFF
CONTROL DESCRIPTION
Reset If module supply voltage drops below a predetermined value the module shuts down,
pressing the reset button restarts the module.
20460-A
RJ45
CONNECTOR
OPTICAL
TRANSMIT
OPTICAL
RECEIVE