iv
Important safety information
This symbol on the product alerts the user to the presence of important
operating and maintenance (servicing) instructions in the literature accom-
panying the product.
This equipment has been designed to the highest quality standards of materials,
workmanship and safety. Do not bypass any of the safety features of this equipment
or operate it in an improper environment.
WARNING!
To avoid hazard from electrical shock and/or fire, adhere to the
safety practices listed in this section and identified within the
instructions of this document.
Use normal caution when installing or modifying telephone lines. Dangerous volt-
ages may be present.
■
Never install telephone wiring during a lightning storm.
■
Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
■
Never touch uninsulated telephone wires or terminals unless the telephone
line is disconnected at the network interface. Always disconnect all tele-
phone lines at the network interface, and power connections from the wall
outlets before servicing or disassembling this equipment.
All wiring external to the product(s) should follow the provisions of the current edi-
tion of the National Electrical Code or any national wiring rules that apply.
WARNING!
Potentially hazardous voltages inside. Service should be
performed only by qualified personnel.
CAUTION!
For continued protection against risk of fire, replace only with
same type and rating of fuse "F1", located on printed circuited
wiring board. 125V, 1.5A.