Filter
Top Products
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Initial Setup
This procedure only needs to be done when setting up the CipherUSB
for the first time, or when a new password is desired. The CipherUSB will
retain the last password it was programmed with and models without
Two-Factor Authentication do not require any driver or software to work.
1. Connect the CipherUSB to a computer running Windows, and connect
a USB storage device into the CipherUSB. The CipherUSB will not
respond until a working storage device is connected to its USB device
port.
2. For models without Two-Factor Authentication, insert the CipherUSB
password utility disc. If an Autorun menu appears, select "Run
CipherUSB.exe" or browse to your CD drive using Windows Explorer
and launch the CipherUSB program. If you are setting up the
CipherUSB for the first time, the following dialog box should appear:
3. Click OK to proceed to the utility. Choose a password as short or as
long (up to 32 characters) as desired, and enter it into the “Setup” and
“Confirm” fields. Then click Start.