Filter
Top Products
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
The HPM-XU Port Multiplier
RAID Setting ButtonDip Switch
eSATA Host Port (Port 5)
USB 3.0/2.0 Host Port
Floppy
Power
Connector
Buzzer
Alarm
Port 2 Port 0
Port 4
Port 1
Port 3
J1:
J3:
eSATA
P0
P1
P2
P3
P4
eSATA
P0
P1
P2
P3
P4
Activity LED
Error LED
Resetting the RAID Mode
NOTE: This procedure destroys all RAID data. It should not harm
individual drives or their contents; however, creating or running backups of
all data is strongly recommended before proceeding.
1. Power down the unit and set the dip switch to the factory default setting
(all switches OFF).
2. While holding the SET button with a ballpoint pen, turn the unit on. A long
beep will sound from the Port Multiplier. The SET button may be released
once the long beep stops.