ADTRAN 1224R Switch User Manual


 
Step 5 – Assign an Ethernet Port to be a member of the Public VLAN
In the example below, we are setting the first Ethernet port as a member of VLAN 100 and
setting it to “edgeport” mode to allow this port to come up immediately. This port should be
plugged into your Internet connection. Make sure your workstation is not plugged into this port
and remember to click the “Apply” button. Also, it is probably a good idea after making this
change to click the “Save” button to save the configuration in nonvolatile memory.
Step 6 – Using the Firewall Wizard to Setup Internet Connection
Sharing (NAPT)
We will use the Firewall Wizard to setup the “Security Zones” on the router. You can also
setup some basic port forwarding using this wizard. Note: You only want to use this wizard for
the initial configuration. All future firewall settings should be added using the “Security Zones”
link.