Filter
Top Products
executing, select the COMport of the host PC that has been connected to ADAM-4500. Then
select "Program" from the bar menu and press <enter> to begin downloading. The screen shown
in figure 3-2 will appear.
Figure 3-2: Program downloading
Follow the instructions shown on the screen. Power off the ADAM-4500 and then re-power on.
Then press any key within 7 seconds to burn the files contained in ALLFILE into the ADAM-
4500's flash ROM. After the files are successfully burned into the flash ROM, the screen in Figure
3-3 will appear. Power off and power on the ADAM-4500 once again. The ADAM-4500 controller
will automatically execute the application program.