Advantech ADAM-4570 Switch User Manual


 
Chapter 3: Installation and Configuration 49
“Device Ready”
The ADAM-4570/ADAM-4571/EDG-4504 is ready to be
configured and is now waiting for acknowledgement from the
device.
“Lost Connection from the Device”
Due to device shut down or network failure, the configuration
utility has lost connection after 5 seconds.
“Fail to apply this setting to the device”
Specific settings are not accepted by ADAM-4570/ADAM-
4571/EDG-4504.
“The device fails to respond”
The connected device does not respond.
“Fail to reset the device”
Fail to reset the ADAM-4570/ADAM-4571/EDG-4504.
3.3.1 Connection Diagnostic
When you complete the configuration of your ADAM-4570/
ADAM-4571/EDG-4504s, you can follow the steps to check if
the ADAM-4570/ADAM-4571/EDG-4504 connects to net-
work or not.
1. Execute the Microsoft DOS program.
2. Execute “PING” command and type your IP address of
ADAM-4570/ADAM-4571/EDG-4504. If ADAM-4570/
ADAM-4571/EDG-4504 connects to your network, it will
display in the screen. If the ADAM-4570/ADAM-4571/
EDG-4504 cannot be pinged, you will need to ask someone