Filter
Top Products
AIMB-250 Series
66 AIMB-250 Series User’s Manual
Item Options Description
Panel Type
640 x 480 18
800 x 600 18
1024 x 768 18
1280 x 1024 24/2
1400 x 1050 24
1600 x 1200 24
1280 x 768 24
1680 x 1050 24
1920 x 1200 24
1024 x 768 24
1024 x 768 18/2
1024 x 768 24/2
1280 x 800 18
1280 x 600 18
Select Panel Resolution that will be displayed
depending on the LCD Panel (LFP)
TV Standard
Off, NTSC
PAL, SECAM
Select the output mode of TV Standard
Video Connector
Automatic, Composite
Component, Both
Select the type of Video display connector
TV Format
Auto, NTSC_M,
NTSC_M_J, NTSC_433,
NTSC_N, PAL_B,
PAL_G, PAL_D,
PAL_H, PAL_I,
PAL_M, PAL_N,
PAL_60, SECAM_L,
SECAM_L1, SECAM_B,
SECAM_D, SECAM_G,
SECAM_H, SECAM_K,
SECAM_K1
This item allows you to select different TV
signal format when the TV Standard item is not
off.
3.5.1.2 IDE Adapter Setup
The IDE adapters control the hard disk drive. Use a separate sub menu to configure each
hard disk drive. The below table will shows the IDE primary master sub menu.
Item Options Description
IDE HDD Auto-detection Press Enter
Press Enter to auto-detect the HDD on
this channel. If detection is successful,
it fills the remaining fields on this
menu.
IDE Primary Master
IDE Primary Slave,
IDE Secondary Master,
IDE Secondary Slave
None
Auto
Manual
Selecting ‘manual’ lets you set the
remaining fields on this screen.
Selects the type of fixed disk. "User
Type" will let you select the number of
cylinders, heads, etc. Note:
PRECOMP=65535 means NONE !
Access Mode
CHS, LBA
Large, Auto
Choose the access mode for this hard
disk
The following options are selectable only if the ‘IDE Channel …’ item is set to ‘Manual’
Cylinder
Min = 0
Max = 65535
Set the number of cylinders for this
hard disk.
Head
Min = 0
Max = 255
Set the number of read/write heads
Precomp
Min = 0
Max = 65535
**** Warning: Setting a value of 65535
means no hard disk
Landing zone
Min = 0
Max = 65535
****
Sector
Min = 0
Max = 255
Number of sectors per track