Filter
Top Products
AIMB-250 Series
78 AIMB-250 Series User’s Manual
3.5.5.7 MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The choices: NA, 3, 4, 5, 7, 9, 10, 11.
3.5.5.8 Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state when the system has “hung”.(Only could working on ATX Power supply)
The choices: Delay 4 Sec, Instant-Off.
3.5.5.9 Wake Up by PCI Card
This will enable the system to wake up through PCI Card peripheral.
The choices: Enable, Disabled.
3.5.5.10 Power On By Ring
This determines whether the system boot up if there’s an incoming call from the Modem.
The choices: Enable, Disabled.
3.5.5.11 Resume By Alarm
This function is for setting date and time for your computer to boot up.
The choices: Enabled, Disabled.
3.5.5.12 Primary/Secondary IDE 0/1, FDD,COM,LPT PORT, PCI PIRQ[A-D]#
Reload Global Timer events are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awake the system from such a mode. In effect ,the
system remain alert for anything which occurs to a device which is configured as
Enabled ,even when the system is in a power down mode.
The choices: Enabled, Disabled.